Two loose-fill options, one project-specific choice
Cellulose and fiberglass are loose-fill options used at the floor of suitable existing vented attics. The important question is how a specified product will be installed in the actual assembly, not which material wins every situation.
A provider should explain the proposed product, coverage, installed performance and suitability alongside the condition of the attic.
How the materials differ
Cellulose loose fill is made from processed paper fibers; fiberglass loose fill uses glass fibers. Both are insulation materials, not a substitute for the separate air-sealing work an attic may need.
A Department of Energy Building America measure guideline describes these material families. That historical background is not a current product specification or a Houston project quote.
| Material | What to clarify in the proposal |
|---|---|
| Cellulose loose fill | The actual product, treatment, installed specification and suitability for the existing attic. |
| Fiberglass loose fill | The actual product, installed specification, coverage and preparation for the existing attic. |
Material background source
U.S. Department of Energy Building America, Measure Guideline: Buried and/or Encapsulated Ducts (2013), section 2.3. This background identifies material composition; it does not prescribe ductwork or an insulation installation for your home.
Questions that matter more than a label
| Consideration | What to ask about either material |
|---|---|
| Performance | Which product and installed specification are proposed? |
| Existing material | Can the current insulation remain, and what preparation is required? |
| Coverage | How will gaps, edges and accessible areas receive appropriate coverage? |
| Air sealing | What work happens before loose fill is installed? |
| Ventilation and access | How are intended ventilation paths, access and relevant clearances maintained? |
| Documentation | What product information and completion record will you receive? |
Avoid unsupported shortcuts
Do not choose solely from a universal thickness number, a claimed savings percentage or a generic “best material” ranking. Product instructions, the home and applicable requirements matter.
This comparison does not claim that either material is always safer, healthier, quieter or more environmentally preferable. Those comparisons need relevant product and assembly evidence.
Roof-deck foam is a different discussion
Spray foam at the roof deck involves a different assembly and should not be treated as an interchangeable top-up to an existing vented attic floor. Whole-house foam conversion is outside this site’s initial offer.
If a proposal changes the assembly, ask for an appropriate explanation of suitability and the work involved before agreeing to it.
Ask for a recommendation with reasons
You can describe your need without selecting a material on the request form. The provider assessing the attic should explain the recommendation and put its actual scope and price in writing.